Student Support | Immigration and Visas | Academic Technology Approval Scheme | Science and Engineering

The information below has been provided by the Faculty of Science and Engineering to provide applicants and offer holders with the information needed to apply for ATAS clearance.

If you will be studying a research degree that requires ATAS, or a taught programme in another Faculty that comes under the ATAS scheme, your admissions team will provide you with the information required for your ATAS application.

Before applying for ATAS clearance, you should:

read the ATAS guidance provided by the Student Immigration Team and check that you are not an exempt from the requirement for ATAS on the basis of your nationality
‌Download this PDF guide to completing the ATAS application form

Click on your course title for the information you will need to apply for ATAS clearance:

MEng Aerospace Engineering

Course title:	MEng Aerospace Engineering
CAH code:	CAH10-01-04
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Mark Quinn
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Advanced Modelling & Simulation Aerospace Group Design Project Launch and Re-entry Gas Dynamics Advanced Heat Transfer Composites and Polymers Advanced Computational Fluid Dynamics Legal Issues Advanced Power Engineering Foresight Helicopters Structural Integrity Autonomous Mobile Robots Experimental Methods

MEng Aerospace Engineering with Industrial Experience

Course title:	MEng Aerospace Engineering with Industrial Experience
CAH code:	CAH10-01-04
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2028 Dr Mark Quinn
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units Advanced Modelling & Simulation Aerospace Group Design Project Launch and Re-entry Gas Dynamics Advanced Heat Transfer Composites and Polymers Advanced Computational Fluid Dynamics Legal Issues Advanced Power Engineering Foresight Helicopters Structural Integrity Autonomous Mobile Robots Experimental Methods

MEng Aerospace Engineering with Management

Course title:	MEng Aerospace Engineering with Management
CAH code:	CAH10-01-04
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Mark Quinn
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units Advanced Modelling and Simulation Launch and Re-entry Gas Dynamics Advanced Heat Transfer Composites and Polymers Advanced Computational Fluid Dynamics Legal Issues Advanced Power Engineering Foresight Helicopters Structural Integrity Risk Management Aerospace Group Design Project Autonomous Mobile Robots Experimental Methods

MEng Chemical Engineering

Course title:	MEng Chemical Engineering (UCAS code H801)
CAH code:	CAH10-01-09
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Mauro Luberti
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Dissertation: Semester 1 Report & Individual Performamce Fundamentals of Numerical Modelling & Simulation Process Fluid Dynamics Utility System Design Chemical Engineering Molecular Simulation The Nuclear Fuel Cycle Sustainable Resources and Processing Sustainable Energy Systems Advanced Separation Processes Science of Formulation Chemical Product Design Dissertaton - Poster Presentation Dissertation

MEng Chemical Engineering with Energy and Environment

Course title:	MEng Chemical Engineering with Energy and Environment (UCAS code H8F4)
CAH code:	CAH10-01-09
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Mauro Luberti
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Dissertation: Semester 1 Report & Individual Performamce The Nuclear Fuel Cycle Utility System Design Sustainable Resources and Processing Sustainable Energy Systems Dissertaton - Poster Presentation Dissertation

MEng Chemical Engineering with Industrial Experience

Course title:	MEng Chemical Engineering with Industrial Experience (UCAS code H803)
CAH code:	CAH10-01-09
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr James Winterburn
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Process Synthesis Process Control Sustainable Development & Industry Process Fluid Dynamics The Nuclear Fuel Cycle Advanced Separation Processes Science of Formulation Utility System Design Fundamentals of Numerical Modelling and Simulation Sustainable Resources and Processing Process Design Design Project 1 Design Project 2 Design Project 3

MEng Chemical Engineering with Study in Europe

Course title:	MEng Chemical Engineering with Study in Europe (UCAS code H810)
CAH code:	CAH10-01-09
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Mauro Luberti
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Process Synthesis Process Control Sustainable Development & Industry Process Fluid Dynamics The Nuclear Fuel Cycle Advanced Separation Processes Science of Formulation Utility System Design Fundamentals of Numerical Modelling and Simulation Sustainable Resources and Processing Process Design Design Project 1 Design Project 2 Design Project 3

MEng Materials Science and Engineering

Course title:	MEng Materials Science and Engineering
CAH code:	CAH10-03-07
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Lee Fielding
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Individual Research Project or Industrial Project Group Management Project Natural Materials & Biological Matrices Lab to Clinic Soft Matter Control & Design of Polymerisation Reactions Polymer Physics & Physical Properties Advanced Metals Processing Superalloys & High-Performance Materials Corrosion Management for Sustainability Corrosion & Control for Industrial Practice Corrosion & Control for Oilfield and Renewable Energy Advanced Textile Technology Textiles Evaluation & Clothing Technical & Biomedical Textiles Advanced Composites Graphene & Nanomaterials Applied Functional Materials & Devices

MEng Materials Science and Engineering with Biomaterials

Course title:	MEng Materials Science and Engineering with Biomaterials
CAH code:	CAH10-03-07
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Lee Fielding
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Individual Research Project or Industrial Project Group Management Project Natural Materials & Biological Matrices Lab to Clinic Soft Matter Technical & Biomedical Textiles Control & Design of Polymerisation Reactions Polymer Physics & Physical Properties Advanced Metals Processing Superalloys & High Performance Materials Corrosion Management for Sustainability Corrosion & Control for Industrial Practices Corrosion Control for Oilfield and Renewable Energy Advanced Textile Technology Textiles Evaluation & Clothing Advanced Composites Graphene & Nanomaterials Applied Functional Materials & Devices

MEng Materials Science and Engineering with Corrosion

Course title:	MEng Materials Science and Engineering with Corrosion
CAH code:	CAH10-03-07
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Lee Fielding
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Individual Research Project or Industrial Project Group Management Project Superalloys & High-Performance Materials Corrosion Management for Sustainability Corrosion & Control for Industrial Practice Corrosion Control for Oilfield and Renewable Energy Natural Materials & Biological Matrices Lab to Clinic Soft Matter Control & Design of Polymerisation Reactions Polymer Physics & Physical Properties Advanced Metals Processing Advanced Textile Technology Textiles Evaluation & Clothing Technical & Biomedical Textiles Advanced Composites Graphene & Nanomaterials Applied Functional Materials & Devices

MEng Materials Science and Engineering with Metallurgy

Course title:	MEng Materials Science and Engineering with Metallurgy
CAH code:	CAH10-03-7
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Lee Fielding
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Individual Research Project or Industrial Project Group Management Project Advanced Metals Processing Superalloys & High-Performance Materials Corrosion Management for Sustainability Corrosion & Control for Industrial Practice Corrosion Control for Oilfeld and Renewable Energy Advanced Composites Soft Matter Control & Design of Polymerisation Reactions Polymer Physics & Physical Properties Natural Materials & Biological Matrices Lab to Clinic Technical & Biomedical Textiles Graphene & Nanomaterials Applied Functional Materials & Devices Advanced Textile Technology Textiles Evaluation & Clothing

MEng Materials Science and Engineering with Nanomaterials

Course title:	MEng Materials Science and Engineering with Nanomaterials
CAH code:	CAH10-03-07
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Lee Fielding
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Individual Research Project or Industrial Project Group Management Project Advanced Composites Graphene & Nanomaterials Applied Functional Materials & Devices Superalloys & High Performance Materials Corrosion Management for Sustainability Corrosion & Control for Industrial Practice Corrosion Control for Oilfield & Renewable Energy Soft Matter Advanced Metals Processing Control & Design of Polymerisation Reactions Natural Materials & Biological Matrices Lab to Clinic Polymer Physics & Physical Properties Advanced Textile Technology Textiles Evaluation & Clothing Technical & Biomedical Textiles.

MEng Materials Science and Engineering with Polymers

Course title:	MEng Materials Science and Engineering with Polymers
CAH code:	CAH10-03-07
Type of course:	Taught Master’s course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Lee Fielding
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Individual Research Project or Industrial Project Group Management Project Soft Matter Control & Design of Polymerisation Reactions Polymer Physics & Physical Properties Advanced Composites Natural Materials & Biological Matrices Lab to Clinic Advanced Metals Processing Superalloys & High-Performance Materials Corrosion Management for Sustainability Corrosion & Control for Industrial Practice Corrosion Control for Oilfield & Renewable Energy Technical & Biomedical Textiles Graphene & Nanomaterials Applied Functional Materials & Devices Advanced Textile Technology Textiles Evaluation & Clothing

MEng Materials Science and Engineering with Textiles Technology

Course title:	MEng Materials Science and Engineering with Textiles Technology
CAH code:	CAH10-03-07
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic Lead:	30 June 2027 Dr Lee Fielding
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Individual Research Project or Industrial Project Group Management Project Advanced Textile Technology Textiles Evaluation & Clothing Technical & Biomedical Textiles Superalloys & High Performance Materials Corrosion Management for Sustainability Corrosion & Control for Industrial Practice Corrosion Control for Oilfield and Renewable Energy Soft Matter Advanced Metals Processing Control & Design of Polymerisation Reactions Natural Materials & Biological Matrices Lab to Clinic Polymer Physics & Physical Properties Advanced Composites Graphene & Nanomaterials Applied Functional Materials & Devices

MEng Mechanical Engineering

Course title:	MEng Mechanical Engineering
CAH code:	CAH10-01-02
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Prof. Lee Margetts
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Advanced Heat Transfer Composites and Polymers Advanced Computational Fluid Dynamics Advanced Manufacturing Processes Additive Manufacturing & 3D Product Modelling Acoustics & Advanced Vibrations Legal Issues Advanced Power Engineering Foresight Robotics, Metrology and Bioengineering Manufacturing Systems Structural Integrity Mechanical Group Design Project Advanced Modelling and Simulation

MEng Mechanical Engineering with Industrial Experience

Course title:	MEng Mechanical Engineering with Industrial Experience
CAH code:	CAH10-01-02
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2028 Prof. Lee Margetts
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Advanced Heat Transfer Composites and Polymers Advanced Computational Fluid Dynamics Advanced Manufacturing Processes Additive Manufacturing & 3D Product Modelling Acoustics & Advanced Vibrations Legal Issues Advanced Power Engineering Foresight Robotics, Metrology and Bioengineering Manufacturing Systems Structural Integrity Mechanical Group Design Project Advanced Modelling and Simulation

MEng Mechanical Engineering with Management

Course title:	MEng Mechanical Engineering with Management
CAH code:	CAH10-01-02
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Prof. Lee Margetts
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Advanced Heat Transfer Composites and Polymers Advanced Manufacturing Processes Additive Manufacturing & 3D Product Modelling Acoustics & Advanced Vibrations Legal Issues Engineering Foresight Robotics, Metrology and Bioengineering Manufacturing Systems Structural Integrity Mechanical Group Design Project

MMath&Phys(Hons) Mathematics and Physics

Course title:	MMath&Phys(Hons) Mathematics and Physics
CAH code:	CAH07-01-01
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Judith McGovern
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units for MMath&Phys(Hons) Mathematics and Physics: MPhys Project Maths Project Frontiers of Solid State Physics Nuclear Structure and Exotic Nuclei Superconductors and Superfluids Quantum Field Theory Frontiers of Particle Physics 1 Advanced Statistical Physics Radio Astronomy Frontiers of Photon Science Laser Photomedicine Gravitation Advanced Technology Enterprise Enterprise Strategy and Marketing Climate Change and Society Nuclear Forces & Reactions Atomic Physics Gauge Theories Frontiers of Particle Physics 2 Biomaterials Physics Soft Matter Physics Early Universe Galaxy Formation Reactor Systems Fourier Analysis and Lebesgue Integration Computational Finance Noncommutative Algebra Differentiable Manifolds Analysis, Random Walks and Groups Representation and Characters of Groups Computation and Complexity Lie Algebras Dynamical Systems Galois Theory Introduction to Uncertainty Quantification Algebraic Number Theory Continuum Mechanics Advanced Uncertainty Quantification Numerical Linear Algebra Transport Phenomena and Conservation Laws Scientific Computing Stability Theory Approximation Theory and Finite Element Analysis Numerical Optimisation & Inverse Problems Exoplanets

MPhys(Hons) Physics

Course title:	MPhys(Hons) Physics
CAH code:	CAH07-01-01
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Prof Mike Birse
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units for MPhys(Hons)Physics: MPhys Project Frontiers of Solid State Physics Nuclear Structure and Exotic Nuclei Superconductors and Superfluids Quantum Field Theory Frontiers of Particle Physics 1 Advanced Statistical Physics Radio Astronomy Frontiers of Photon Science Laser Photomedicine Gravitation Advanced Technology Enterprise Enterprise Strategy and Marketing Climate Change and Society Nuclear Forces & Reactions Atomic Physics Gauge Theories Frontiers of Particle Physics 2 Biomaterials Physics Soft Matter Physics Early Universe Galaxy Formation Reactor Systems Exoplanets

MPhys(Hons) Physics with Astrophysics

Course title:	MPhys(Hons) Physics with Astrophysics
CAH code:	CAH07-01-01
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Patrick Weltevrede
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units for MPhys(Hons)Physics with Astrophysics: MPhys Project Frontiers of Solid State Physics Nuclear Structure and Exotic Nuclei Superconductors and Superfluids Quantum Field Theory Frontiers of Particle Physics 1 Advanced Statistical Physics Radio Astronomy Frontiers of Photon Science Laser Photomedicine Gravitation Advanced Technology Enterprise Enterprise Strategy and Marketing Climate Change and Society Nuclear Forces & Reactions Atomic Physics Gauge Theories Frontiers of Particle Physics 2 Biomaterials Physics Soft Matter Physics Early Universe Galaxy Formation Reactor Systems Exoplanets

MPhys(Hons) Physics with Study in Europe

Course title:	MPhys(Hons) Physics with Study in Europe
CAH code:	CAH07-01-01
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Alessandro Principi
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units for MPhys(Hons)Physics with Study in Europe: MPhys Project Third Year Laboratory Frontiers of Solid State Physics Nuclear Structure and Exotic Nuclei Superconductors and Superfluids Quantum Field Theory Frontiers of Particle Physics 1 Advanced Statistical Physics Radio Astronomy Frontiers of Photon Science Laser Photomedicine Gravitation Advanced Technology Enterprise Enterprise Strategy and Marketing Climate Change and Society Nuclear Forces & Reactions Atomic Physics Gauge Theories Frontiers of Particle Physics 2 Biomaterials Physics Soft Matter Physics Early Universe Galaxy Formation Reactor Systems Exoplanets

MPhys(Hons) Physics with Theoretical Physics

Course title:	MPhys(Hons) Physics with Theoretical Physics
CAH code:	CAH07-01-01
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 June 2027 Dr Jonathan Gaunt
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units for MPhys(Hons)Physics with Theoretical Physics: MPhys Project Frontiers of Solid State Physics Nuclear Structure and Exotic Nuclei Superconductors and Superfluids Quantum Field Theory Frontiers of Particle Physics 1 Advanced Statistical Physics Radio Astronomy Frontiers of Photon Science Laser Photomedicine Gravitation Advanced Technology Enterprise Enterprise Strategy and Marketing Climate Change and Society Nuclear Forces & Reactions Atomic Physics Gauge Theories Frontiers of Particle Physics 2 Biomaterials Physics Soft Matter Physics Early Universe Galaxy Formation Reactor Systems Exoplanets

MSc Advanced Chemical Engineering

Course title:	MSc Advanced Chemical Engineering
CAH code:	CAH10‐01‐09
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 September 2024 Dr Robin Curtis
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units Postgraduate Taught (PGT) Plenary Sessions Health and Safety Academic Practice Research Techniques & Methods (Skills) Computer Aided Process Design Energy Systems The Nuclear Fuel Cycle Process Fluid Dynamics Utility System Design Advanced Separation Processes Science of Formulation Sustainable Resources and Processing Research Techniques & Methods (Proposal) Advanced Process Simulation Waste Management Treatment Reaction Systems Design Oil & Gas Processing Chemical Engineering Molecular Simulation Sustainable Energy Systems Chemical Product Design Dissertation

MSc Advanced Engineering Materials

Course title:	MSc Advanced Engineering Materials
CAH code:	CAH10-03-02
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 September 2024 Professor Sarah Cartmell
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units for MSc in Advanced Engineering Materials: Introduction to Materials Science Research Methods Principles of Advanced Engineering Materials Advanced Metals Processing Superalloys & High-Performance Materials Dissertation Graphene & Nanomaterials Advanced Composites

MSc Advanced Process Integration & Design

Course title:	MSc Advanced Process Integration & Design
CAH code:	CAH10‐01‐09
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 September 2024 Dr Robin Curtis
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units Health and Safety Academic Practice Postgraduate Taught (PGT) Plenary Sessions Research Techniques & Methods (Skills) Computer Aided Process Design Utility System Design Energy Systems Research Techniques & Methods (Proposal) Oil & Gas Processing Reaction Systems Design Advanced Process Simulation Sustainable Energy Systems Dissertation

MSc Aerospace Engineering

Course title:	MSc Aerospace Engineering
CAH code:	CAH10-01-04
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 September 2024 Dr Mostafa Nabawy
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Aerospace Group Design Project Research Methods Experimental Methods Computational Fluid Dynamics Launch and Gas Re-entry Advanced Computational Fluid Dynamics Composites and Polymers Helicopters Structural Integrity Advanced Power Autonomous Mobile Robots Dissertation

MSc Corrosion Control Engineering

Course title:	MSc Corrosion Control Engineering
CAH code:	CAH10-03-02
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 September 2024 Professor Sarah Cartmell
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units for MSc in Corrosion Control Engineering: Introduction to Materials Science Research Methods Principles of Corrosion Corrosion Management for Sustainability Corrosion Control for Industrial Practice Dissertation Corrosion Control for Oilfield and Renewable Energy Superalloys & High-Performance Materials

MSc Mechanical Engineering Design

Course title:	MSc Mechanical Engineering Design
CAH code:	CAH10-01-02
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 September 2024 Dr Glen Cooper
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units Mechanical Engineering Group Design Research Methods Experimental Methods Finite Elements Robotics, Metrology and Bioengineering Acoustics and Advanced Vibrations Structural Integrity Composites and Polymers Dissertation

MSc Nanomaterials

Course title:	MSc Nanomaterials
CAH code:	CAH10-03-07
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 September 2024 Dr Andrey Kretinin
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units for MSc in Nanomaterials: Introduction to Materials Science Research Methods Principles of Nanomaterials Advanced Composites Graphene & Nanomaterials Dissertation Applied Functional Materials & Devices Soft Matter

MSc Nuclear Science and Technology

Course title:	MSc Nuclear Science and Technology
CAH code:	CAH10-01-09
Type of course:	Taught course
Course start date:	8 September 2023
Course end date: Academic lead:	30 September 2024 Dr Gavin Smith
List of course units: When submitting your ATAS applicationplease include all of the units listed here – you arenot required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units for MSc Nuclear Science and Technology: N01 - Reactor Physics, Criticality & Design N02 - Nuclear Fuel Cycle N03 - Radiation & Radiological Protection N04 - Decommissioning, Radioactive Waste & Environmental Management N06 - Reactor Materials & Lifetime Development N08 - Particle Engineering in the Nuclear Industry N09 - Policy, Regulation & Licensing N10 - Processing, Storage & Disposal of Nuclear Waste N11 - Radiation Shielding N12 - Reactor Thermal Hydraulics N13 - Criticality Safety Management N15 - Severe Accidents N16 - Chemical Aspects of Nuclear Technology N31 - Management of Decommissioning Process N32 - Experimental Reactor Physics Dissertation

MSc Polymer Materials Science and Engineering

Course title:	MSc Polymer Materials Science and Engineering
CAH code:	CAH10-03-02
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 September 2024 Professor Sarah Cartmell
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units for MSc in Polymer Materials Science and Engineering: Introduction to Materials Science Research Methods Principles of Polymers & Composites Control & Design of Polymerisation Reactions Polymer Physics & Physical Properties Dissertation Soft Matter Advanced Composites

MSc Renewable Energy and Clean Technology

Course title:	MSc Renewable Energy and Clean Technology
CAH code:	CAH10‐01‐09
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 September 2024 Dr Alessandra Parisio
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Smart grids and sustainable electricity systems Techniques for research and industry Introduction to power systems Interfacing clean energy systems Understanding energy as a system driving modern society Solar energy technologies Zero carbon built infrastructure Marine energy: wind, wave, and tidal Dissertation

MSc Renewable Energy and Clean Technology with Extended Research

Course title:	MSc Renewable Energy and Clean Technology with Extended Research
CAH code:	CAH10‐01‐09
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	1 June 2025 Dr Alessandra Parisio
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Smart grids and sustainable electricity systems Techniques for research and industry Introduction to power systems Interfacing clean energy systems Understanding energy as a system driving modern society Solar energy technologies Zero carbon built infrastructure Marine energy: wind, wave, and tidal Extended Dissertation Project

MSc Robotics

Course title:	MSc Robotics
CAH code:	CAH10‐01‐04
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 September 2024 Dr Simon Watson
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Robotic Systems Foundations of Machine Learning Software for Robotics Autonomous Mobile Robots Robotic Manipulators Cognitive Robotics and Computer Vision Robotic System Design Project Dissertation

MSc Robotics with Extended Research

Course title:	MSc Robotics with Extended Research
CAH code:	CAH10‐01‐04
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	1 June 2025 Dr Simon Watson
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Robotic Systems Foundations of Machine Learning Software for Robotics Autonomous Mobile Robots Robotic Manipulators Cognitive Robotics and Computer Vision Robotic System Design Project Extended Research Dissertation

MSc Subsurface Energy Engineering

Course title:	MSc Subsurface Energy Engineering
CAH code:	CAH10‐01‐09
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 September 2024 Dr Vahid Niasar
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units Health and Safety Academic Practice Postgraduate Taught (PGT) Plenary Sessions Fundamentals of Numerical Modelling and Simulation of Subsurface Key interpretation skills: Formation Evaluation Subsurface Physical-Chemical Processes Cycle Fundamentals of Applied Subsurface Geoscience Properties of Subsurface Fluids Advanced Subsurface Modelling Rock/subsurface Mechanics and Geoengineering Communication Skills and Project Preparation Dissertation

MSc Thermal Power and Fluid Engineering

Course title:	MSc Thermal Power and Fluid Engineering
CAH code:	CAH10-01-02
Type of course:	Taught course
Course start date:	18 September 2023
Course end date: Academic lead:	30 September 2024 Dr Georgios Fourtakas
List of course units: When submitting your ATAS application please include all of the units listed here – you are not required to choose or predict the courses/optional units you intend to take. The list of course units on your ATAS certificate must match this list. If they do not match this list then your ATAS clearance will not be valid and you will need to re‐apply.	List of course units: Research Methods Experimental Methods Computational Fluid Dynamics I Heat Transfer Advanced Computational Fluid Dynamics Advanced Power Advanced Engineering Fluid Mechanics Thermodynamics Dissertation